Do you want to roam around the office with your wireless headset? Now you can roam around the office freely on your Plantronics headset and never miss a call again. The Plantronics EHS Cable APN-91 for (NEC) phones 89280-11 is what you need. Check the list below to make sure that your phone is compatible with this wonderful cable.
TIP: If you are famililar with the NEC phones and features and want to avoid using the "lifter" this item is for you. If you rather have a more simpler install process or are unfamiliar with your phones settings, features and configurations purchase the HL-10 Lifter instead for remote answering.
Compatible NEC phones:
- DT330
- DT430
- DT730
- DT750
- DT830
- DT850
- Note: You must have the latest NEC firmware for this headset to work properly.
***Note: DT 300/DT310 and DT710 series are NOT compatible and will not work. This includes - DTL-2E-1, DTL-6DE-1, DTL-12E-1, ITL-2E, ITL-6DE, and ITL-8LDE) are not compatible AND will not work with the EHS cable. Use HL-10 lifter instead of APN-91 for these phones.)
Reference Materials
Important Setup Information:
- Disconnect the phone from the network cable prior to installing the EHS cable. Insert cable “A” per diagram (see Plantronics EHS Guide or NEC User guide) and install the plastic flap included with the APN-91 cable, per the diagram prior to reconnecting the network connection. Please wait 20-30 seconds after all connections are made before pressing the headset button to make a call. Please contact NEC for more information.
- Install the ringer detect device on the phone over the speaker, under the handset. This is then plugged into the socket mounted midway along the audio cable. Supports only DT730, DT750 and DT330 Series. Please contact NEC or your telephone adminstrator for more information.
- ***The APN-91 only works with the i-SIP/N-SIP versions of the DT730 and DT750 terminals using the SV8100, SV8300, SV8500, SV9300, SV9500 switch. Nec phones using the "3C" server do not support EHS.
Commonly Asked question about this item:
I am not getting call control with Plantronics APN 91 and NEC DT330/730, DT430/480 and DT 750 terminals. Is there any special configuration required for EHS to work?In order for the APN 91 to work with NEC DT series phones, customers should follow a two-step process. First, customers should verify that they have the compatible phone terminal and the univerge switch. You can download the
NEC EHS Setup and Compatibility User Guide for further details. Second step is to configure EHS on the NEC switch. The setup and compatibility information can be found in the NEC documentation below. EHS cannot be setup on the phone menu. NEC’s support number is 1-800-852-4632.
