5 Steps to Replace Your Jabra Evolve2 40 Ear Cushions
Posted by Global Teck Worldwide on 11th Aug 2022
The Jabra Evolve2 40 is a workhorse headset. It's going to be with you for a long time. Your earpads, however, would flake out on you after years of continuous use. Don't fret. We got replacement cushions for you and changing them can be done in a snap!
5 Steps to Replace Your Jabra Evolve2 40 Ear Cushions (Tutorial)
Author: Global Teck Staff / Blog / Published: August 11, 2022
Best New Speakerphone 2021 - Poly Sync Best New Speakerphone 2021 - Poly Sync 20
The Jabra Evolve2 40 (corded) was built to last. However, the leatherette earpads would flake out on you after some time. The cushion would be exposed and the headset would be uncomfortable to wear. That being said, Jabra has provided cushion replacements that provide more comfort and make your Evolve2 40 look like it's fresh out of the box.
Here are 5 simple steps that you need to take to replace those worn out ear pads. It's so easy!
1. Carefully pull the old earpads from the earpiece. Don't worry about your hands slipping. The earpads are easy to grab and separate from the earpiece. You also might hear a snap. That's normal. You didn't break it.
2. Take note of the position of the notches on the ear pad as you take them off. This will make the task of replacing the ear cushions easier later. Remember where the notches are. The earpad may not fuse with the headset if you're pushing it on the wrong side.
3. Do also take note of the notches in the ear piece. These will fit perfectly on your fresh ear pads. Yup. There are notches on the earpiece too! Remember where they are as well to avoid getting frustrated when they don't fit. Some people are actually having difficulty because of these notches so it helps if you know where they are. You wouldn't want your blood pressure to rise now, do you?
4. Prepare your replacement earpads. See the letters "R" and "L?" You got it. These letters correspond to which side of the headset the earpads go to.
5. Gently push the ear pad to the ear piece. Remember those notches from earlier? Make sure that they are aligned with each other. You should hear a snap. Place the earpads on the right side of the headset. All it takes is a gentle push.
There you have it! Easy right? Now your Jabra Evolve2 40 is good as new!
It's time to change those cushions! Order here now!
Jabra Evolve2 65/40 Cushion Replacement
Not a reader? We got you! Here's a video!
Video Transcript
Jabra Evolve2 40 Cushion Replacement
In this video, we're replacing the Jabra Evolve2 ear pads for the Evolve2 65 and 40. You will notice that the 40 and the 65 have the same form factor except for that 65 is cordless and the 40 is corded. Otherwise, these ear pads will work for both. So let's get started.
These come off very easily. They're labeled R and L for right and left. We just snap those off and then we'd set the other one off. And what you want to do is when you snap them off, you can grab with the fingertips and it'll pop right off.
Now, we've got the replacements here, so let's take the bad one's out. We're going to have our fresh new ear pads that are going to go in and you'll see that they still have an outline of an R and an L, so that you'll know which part is facing from the top and which one's in the bottom.
So, we're just going to stick them back in as well as R and L. A little pointer on this one here. So what you're looking for is this little notch, and I'll bring this up closer to this camera. There's a notch right in here. And this is the top part. This is the bottom part. Top, bottom. And there's the notch right in here. And that's where you're going to line up that notch with another notch. That's right up here, which is towards the part that is on the top.
Okay. And that's how you know, you're going to line it up. So now we've got the R facing up. We're just going to try to eyeball it and we see that the fatter nodule is sticking up. This thinner one is down. We've got our other little notch here and we're just going to eyeball it. We can also see that the R is facing up. And when we have it there, see, I didn't line it up properly that time. There we go. We're going to hear a snapping. There we go. That's how you know, you've got it locked in place.
You don't have to press it very hard. They're very fitted so that they'll fit right on and no hard snapping, but just a good gentle push. You want to use both thumbs and from underneath, I just typically use my other fingers below. It's for support. So now we'll do that again on the left. We locate the fatter part, the fatter of the two nodules that are in there.
We'll just look for this little ridge that's in here as well. Okay. And we try to line that up as well with the adjacent notch that's there. Okay. I'm going to just eyeball it so you could see. I'm just eyeballing it up here and I'm going to look for that snap. Okay. I didn't get a snap.
So let me try again. There we go. Second time's the charm and there we go. We have replacement ear pads for both the Jabra Evolve2 40 and Evolve2 65.
Comments? Questions? We got you covered!
Do you have multiple employees using these for remote work? Let our team help you customize with a bulk purchase, bundle company equipment, and make the purchasing process frictionless. If you have questions about Bluetooth headsets then go ahead and start a chat session, call, or reach out to us. We would love to help you on your journey to find your perfect device for your needs.